3D-Printable Filament Improved Roundness For Better Extrusion Grab 3D Printer Model
The file '3D-Printable Filament Improved Roundness For Better Extrusion Grab 3D Printer Model' is (stl) file type, size is 3.0MB.
The file '3D-Printable Filament Improved Roundness For Better Extrusion Grab 3D Printer Model' is (stl) file type, size is 3.0MB.
Model based on Turbo_SunShine's 3D-printable filament, but with higher resolution that makes the section rounder. The original printed filament slips when extruded under my condition due to the hexagon section thinner than round section. Included 130mm diameter spiral which gives about 12.7g filament
If you do a 2-pass printing for uniform color, I suggest adjust flow ratio to 1.2x your current value for both passes, otherwise under extrusion will combine and become more serious. Increasing flow ratio is also effective for one-pass printing, but either for printing filament or printing target model but not both. Mouse ear brim can be used to prevent ends from popping up from bed.
| 130mm_filament_12.7g.stl | 7.8MB | |
| 130mm_filament_3_loops.stl | 227.2KB | |
| 130mm_filament_4_loops.stl | 302.2KB |
![[OLD VERSION] Spool Adapter For Anet A8, A6 And Others 3D Printer Model](https://cdn.3axis.co/assets/50/89/b2/1c/5089b21c-cc99-4849-bfcd-c09dfe8d933c/images/e016eebd-fb6d-42ff-b05f-89fdc7070491_thumb.jpg)
