3D Printable Bike Brake 3D Printer Model
The file '3D Printable Bike Brake 3D Printer Model' is (STL) file type, size is 1.0MB.
The file '3D Printable Bike Brake 3D Printer Model' is (STL) file type, size is 1.0MB.
Have you ever needed an extra bike brake? Unless you modify/work on bikes or you are me, it seems unlikely.
Here's a good idea: ditch the boring brakes and print out your own!!!
Only the Left Side (front brake) for now, but do let me know if anyone wants a reversed version.
This is a modification of a brake assembly found online!
UPDATE 4/23/14:
I have added configurations for both left hand and right hand brakes
Brake Lever has been optimized to print flat on the build plate, as recommended by yzorg. No support needed!
UPDATE 12/17/14:
Added strengthening rib feature to the connector part. This is intended to reduce flexing when the brake lever is pulled. Let me know how it works!
| LH_BRAKE_CONNECTOR.STL | 1007.5KB | |
| LH_BRAKE_LEVER.STL | 387.0KB | |
| RH_BRAKE_CONNECTOR.STL | 1007.9KB | |
| RH_BRAKE_LEVER.STL | 387.5KB |
