This is a SCAD remix for the bearing designed by BoomZilla1 (https://www.thingiverse.com/thing:2746804).
Flexible adjustment of a bearing that can be printed in one piece. Depending on your printer, you will need to adjust the spacing between the "balls" and the "rings" and the minimum spacing between the balls in the .scad file. A spacing of 0.2mm - 0.25mm works well for me. I recommend printing a small bearing to test the required spacing on your printer.
To get a bearing that has smaller "balls" than rings you can adjust the ball height space. If your "balls" are smaller than the rings you should use support to print the balls properly.
The appended .stl files are just examples of how the bearings could look like
The default values at the SCAD-file generate a 608 bearing (di=8mm, do=22mm h=7mm).
Feel free to share your thoughts to improve :)
| 3D-cylinder_bearing.scad | 3.8KB | |
| 3D-cylinder_bearing_10_30.stl | 450.1KB | |
| 3D-cylinder_bearing_22_40.stl | 575.1KB | |
| 3D-cylinder_bearing_40_70.stl | 650.1KB | |
| 3D-cylinder_bearing_50_80.stl | 800.1KB | |
| 3D-cylinder_bearing_608.stl | 475.1KB | |
| 3D-cylinder_bearing_608_cuted.stl | 341.1KB |
