IMPORTANT PLEASE READ BEFORE PRINTING
This print is ready to go and does not need any more fixing to be printed!
3D Print other RWBY models here:
https://www.thingiverse.com/thing:2357481 Ruby Rose
https://www.thingiverse.com/thing:2397963 Weiss Schnee
https://www.thingiverse.com/thing:2447958 Blake Belladonna
https://www.thingiverse.com/thing:2471634 Yang Xiao Long
https://www.thingiverse.com/thing:2504153 Velvet
https://www.thingiverse.com/thing:2753068 Nora
Join the Anime Figure group and share and print anime figures! As well as Updates on what im doing next https://www.thingiverse.com/groups/animefigures
Support me on Patreon! https://www.patreon.com/AnimuAnimu/posts
vvv INSTRUCTIONS vvv
This print already has all the support material ready to go, DO NOT add SUPPORT MATERIAL.
the support material that i already added to the file has tapered ends and easily breaks off, however be very careful removing.
Print with AT LEAST 30% infill and be careful removing supports, there are many fragile features.
DO NOT PRINT WITH A RAFT OR SUPPORT MATERIAL
Do not freak out of the supports fail mid print, they are mostly redundant and designed to recover.
A brim does help with bed adhesion though
there are TWO stl files included, PRINT THE 3DPrintReady FILE. I included files of the print without supports if you want to add your own supports. note a base is necessary or the model will tip over.
print this at .1mm layer height for optimal results.
i did a bunch of smoothing in Meshmixer, so the stl file is quite big even after being 'reduced' so be patient!
Im working on making the whole RWBY gang, but my studies are sucking all my time and on top of that meshmixer keeps crashing so be patient! these things a pain to get printable
| 3DPrintReadyZwei.stl | 77.2MB | |
| AddYourOwnSupportsZwei.stl | 77.4MB |
![Timon [Lion King] 3D Printer Model](https://res.3axis.co/d5198e72-7677-4efb-b76b-4147651e7fcd/images/b60df999-b01c-4211-8da1-3c6facfdd42e_thumb.jpg)
