3D Construction Set 3D Printer Model
The file '3D Construction Set 3D Printer Model' is (STL) file type, size is 1.1MB.
The file '3D Construction Set 3D Printer Model' is (STL) file type, size is 1.1MB.
Recently I made a shadowless lighting rig and highlight lamp. I had some LED boards laying around and I'm sure any boards you have lying around will work as well. I bought 1/2" aluminum rod from McMaster Carr it was 1/2" x 1/2" x 36" square tubing. I also used 1/4 20 bolts (3/4" long) and nuts for the hinges. Use the caps to cover the bolt head and the nut to tighten the hing assembly. The mounting base has a #8 clearance hole with a countersink. Check out the photos of my rig!!
| Cap.STL | 1.6MB | |
| LED_Board_Retainer.STL | 173.9KB | |
| LED_Pole_Stand.STL | 509.3KB | |
| Pivot_Finger_Connector.STL | 164.1KB | |
| Pivot_Fork_Connector.STL | 232.5KB | |
| Tube_Cap.STL | 130.7KB | |
| TwoSideLock_Connector.STL | 110.8KB | |
| Wire_Retainer.STL | 14.5KB |
