38mm Nose Cone Plug 3D Printer Model
The file '38mm Nose Cone Plug 3D Printer Model' is (stl,stp) file type, size is 114.3KB.
The file '38mm Nose Cone Plug 3D Printer Model' is (stl,stp) file type, size is 114.3KB.
This part is a end plug for a 38mm rocket nose cone. It has 2 nut traps to hold M3 nuts, drill holes in the shoulder of the nose cone and countersink them carefully. Use two M3 flat head screws to attach the plug to the nose cone.
Use a heavy duty screw eye for attaching recovery harness to the nose cone.
This particular plug has a slot to hold a small circuit board to power two LED's attached to the tower on the cover.
Print with ABS or PETG for best results. PLA has a tendency to soften on hot days and should be avoided.
| 38mmNoseConePlug_Base.stl | 203.1KB | |
| 38mmNoseConePlug_Base.stp | 137.5KB | |
| 38mmNoseConePlug_Cover.stl | 127.0KB | |
| 38mmNoseConePlug_Cover.stp | 73.3KB |
