370mm Quadcopter DJI Flamewheel Style 3D Printer Model
The file '370mm Quadcopter DJI Flamewheel Style 3D Printer Model' is (3DS,STL) file type, size is 4.2MB.
The file '370mm Quadcopter DJI Flamewheel Style 3D Printer Model' is (3DS,STL) file type, size is 4.2MB.
This is a re-sized version to accommodate 8" or 9" props (shown here with 8" props). This frame including hardware only weighs about 170g. Motor mounting holes are 19mm x 16mm.
You will need the following hardware to assemble the frame:
4 - M3 x 35mm
8 - M3 x 15mm
12 - M3 locknuts
Motor mounting hardware:
If you are using the optional landing feet you will need:
16 - M3 x 8mm
If you are NOT using the landing feet you will need:
16 - M3 x 5mm
| all_parts.3DS | 2.9MB | |
| arm.STL | 567.9KB | |
| bottom_plate.STL | 179.4KB | |
| leg.STL | 65.1KB | |
| topplate.STL | 286.0KB | |
| top_plate_V2.STL | 187.7KB | |
| whole_quad.STL | 5.9MB |
