Stock front brakes hoses on a 350Z are 3-piece design. When upgrading to a 1-piece design, the kits either come with generic brackets which are rubbish, or they don't even come with any.
In my case, I went with Chase Bays brake hoses which didn't come with any brackets.
Rather than letting the hoses dangle around, possibly rubbing on things - I designed these to bolt to the original bracket locations and firmly hold the hose.
It is made to fit a hose with an OD of 7.5mm.
The hole for the hose is a 7.4mm so it doesn't freely move around.
For the strut location, they need to be orientated so the hose is in a horizontal position, as shown in the pics. Use the original nut to secure.
For the knuckle location, these are the same, so it doesn't matter which way you install. But you will need longer bolts - these are M8 x 30mm, with washers.
I was having some issues printing all the brackets at the same time, as I struggle a bit with ABS. So, I printed each part separately, hence why have uploaded the individual part files.
Hope it can help some of my fellow Z's.
| 350Z_BRAKE_HOSE_BRACKETS_-_1_SET.stl | 187.0KB | |
| 350Z_BRAKE_HOSE_BRACKETS_-_2_SET.stl | 373.7KB | |
| 350Z_Brake_Hose_Bracket_-_KNUCKLE_1.stl | 203.2KB | |
| 350Z_Brake_Hose_Bracket_-_KNUCKLE_2.stl | 203.2KB | |
| 350Z_Brake_Hose_Bracket_-_STRUT_1.stl | 71.9KB | |
| 350Z_Brake_Hose_Bracket_-_STRUT_2.stl | 71.5KB |
