This was actually printed in an X1 Carbon.
To complete this build, you will most importantly need a Teensy 2.0++,. PMW3360 optical sensor, (3) 3mm bearings, (2) M2.5 hex nuts, (2) M2.5 6mm screws (might need 8mm), & 34mm Trackball
Please take a look at my GitHub site in order to create your own. I'm planning on testing options moving forward knowing that the teensy2pp is end of life.
The full project can be completed visiting my github.
https://github.com/chrisistansell/Cyborg-Trackzeron/tree/main
I try to check the code monthly. If any changes are needed I'll fix the code.
Currently I've built out support for VIA and VIAL. Unfortunately, since this is my own code, it will not interact with the Azeron software.
| Bottom_-_Shorter.stl | 36.4KB | |
| Final_use_3.5mm_bearings.stl | 692.6KB |
