31.8mm Handlebar Tripod Head Mount 1/4 3D Printer Model
The file '31.8mm Handlebar Tripod Head Mount 1/4 3D Printer Model' is (scad,stl) file type, size is 817.8KB.
The file '31.8mm Handlebar Tripod Head Mount 1/4 3D Printer Model' is (scad,stl) file type, size is 817.8KB.
Simple clamp for mounting a tripod head to a bicycle handlebar allowing you to mount any camera to the bike.
I use it to mount a camera screen actually.
Print in abs, +90% infil, don't overtighten, I used formfutura TitanX
I used a socket 1/4 screw as it was all I could find here in Belgium,length should be 12mm, you can find these at rsonline, http://benl.rs-online.com/web/p/socket-screws/0292079/
Also, be carefull when cycling, keep your eyes on the road ;-)
| barclamp.scad | 694.0B | |
| barclamp.stl | 1.7MB | |
| barclamp_16.stl | 1.7MB | |
| barclamp_18.stl | 1.7MB | |
| barclamp_under.scad | 669.0B | |
| barclamp_under.stl | 1.2MB | |
| barclamp_under_16.stl | 1.3MB | |
| barclamp_under_18.stl | 1.3MB |
