Manually operated precision 3 part dispenser for 30cc and 55cc tubes/barrels. Does't require supports to print.
Recommended layer height 0.2mm or below. 3-5mm of brim recommended.
Takes around 4h15m to print with previously mentioned settings.
Note when placing thumbscrew.stl on bed and assembling the unit because the design features buttress thread. Position flat side of the buttress thread facing away from the attached tube.
Tube twists and locks into place, so no need to undo the whole screw.
Link to the 30 / 55cc tube stand-
https://www.thingiverse.com/thing:4797599
https://www.prusaprinters.org/prints/60714-30cc-55cc-tube-stand
Feel free to modify, share or sell in any format.
Inspired by user Perinski "Solder paste and flux Dispenser"- https://www.thingiverse.com/thing:3148234
| body.stl | 422.0KB | |
| screw_30cc.stl | 12.9MB | |
| screw_50cc.stl | 18.5MB | |
| thumbscrew.stl | 2.7MB |
