This is a custom-designed corner mount for an Eve motion sensor, perfect for mounting under the eave of your house at a 30-degree downward angle. This mount is compatible with Eve motion sensors that use an M3x5mm bolt for attachment. The design also incorporates the use of 3M Velcro strips for secure attachment to the wall, making it easy to install and remove as needed.
Features:
- 30-Degree Angle: Optimized for under-eave installations to maximize motion detection coverage.
- M3x5mm Bolt Compatibility: Designed to fit Eve motion sensors that utilize a standard M3x5mm bolt for secure mounting.
- 3M Velcro Strips: Provides a versatile mounting solution that is easy to install and remove without damaging the wall.
- Corner Mount Design: Allows for effective use of space and ensures the sensor is positioned for optimal detection.
Materials Needed:
- M3x5mm bolt (1)
- 3M Velcro strips (2)
Print Settings:
- Resolution: 0.2 mm
- Infill: 20%
- Supports: Not required (depending on your printer’s capabilities and the orientation you choose to print in)
Instructions:
- Print the corner mount using the settings above.
- Attach the Eve motion sensor to the mount using an M3x5mm bolt.
- Clean the wall surface where you intend to mount the sensor.
- Attach the 3M Velcro strips to the back of the mount and press firmly to the wall.
- Adjust the sensor to ensure it is positioned correctly for optimal motion detection.
Usage Tips:
- Ensure the Velcro strips are securely attached to both the mount and the wall for a stable installation.
- Position the mount at the desired angle and height to cover the required area effectively.
- Regularly check the Velcro strips and the bolt for any signs of wear and tear, especially in outdoor conditions.
Feel free to leave comments or suggestions for improvements. Happy printing!
