3-Way Key Holder Spinner 3D Printer Model
The file '3-Way Key Holder Spinner 3D Printer Model' is (stl) file type, size is 94.9KB.
The file '3-Way Key Holder Spinner 3D Printer Model' is (stl) file type, size is 94.9KB.
This is a 3 Way Figit Spinner Key Fob Combination that holds 6 keys and spins on a standard 608 Bearing.
I have made several swiss army style key holders over the years but one day i decided to make a figit spinner that was actually useful. This works well holding 6 keys and I am sure you could make it hold a different number.
As a Figit Spinner it is not as balanced as could be desired, depending on your keys, but it works pretty well.
So if you want something a little different then you might want to try this out.
This is using 3mm Socket Head Cap Screws and should use Lock Nuts although I used standard nuts and blue lock tight.
| 3way_Key_Holder_1.stl | 157.5KB | |
| 3way_Key_Holder_2.stl | 179.9KB | |
| 3way_Key_Holder_3.stl | 40.9KB |
