3.5 Inch Gauge Carriage Frame For Guinea Pig Train 3D Printer Model
The file '3.5 Inch Gauge Carriage Frame For Guinea Pig Train 3D Printer Model' is (stl) file type, size is 47.3KB.
The file '3.5 Inch Gauge Carriage Frame For Guinea Pig Train 3D Printer Model' is (stl) file type, size is 47.3KB.
!UPDATE! new extension pieces add 10cm to your carriage per pair. (Max 2 pairs advised)
Print 2x bogie frame connect point, 2x end frame, 2x middle section, 2x bogie section, then mirror bogie section in your slicer or another cad software to print 2 more of the mirrored version
Requires a minimum of 20 m3x10 screws, 24 recommended
Very basic 3.5 inch gauge carriage frame.
There are 3mm holes around them frame with can be used to screw on a shell or any other parts as desired.
Bogies attach via a single m3 screw each, preferably 25mm or longer. If your track is rough, then using a lock nut underneath the bogie is a good idea.
Feel free to make remixes and shells for different carriages, all are welcome as long as they are free, just credit me using the link to these files.
happy building!
| Bogie_frame_connect_point.stl | 32.4KB | |
| Bogie_section_2.stl | 44.1KB | |
| Copy_of_End_frame_1.stl | 78.6KB | |
| Extension_section_v1.stl | 56.1KB | |
| MIddle_section.stl | 46.7KB |
