3.5 HDD To 4x 2.5 HDD Adapter (Nox Hummer Spark) 3D Printer Model
The file '3.5 HDD To 4x 2.5 HDD Adapter (Nox Hummer Spark) 3D Printer Model' is (STL) file type, size is 31.2KB.
The file '3.5 HDD To 4x 2.5 HDD Adapter (Nox Hummer Spark) 3D Printer Model' is (STL) file type, size is 31.2KB.
Made this adapter with the NOX Hummer Spark PC case in mind, to extend the open 3.5 slot and add 4x 2.5 disk slots, perfect for my home NAS needs.
Feel free to use it for anything else you find suitable.
For the best print quality place the part vertically in the print bed, full side down (not the contoured one ;) )
ps1: print from the photo was one of the previous versions that had a slight lateral unintended grip to the disks, which was workable (that's why I kept it) but changed for the later version and also made the 2.5 disk holes larger and with a different length to allow disk movement.
ps2: For the 3.5HDD screw holes I used M3x10 Self-Taping screws, another option is to use threaded heat-set inserts.
| HDD_Holder_v5_.STL | 186.6KB |
