I made this in response to a comment a different model I made where they said they didn't want to spent 175$ on a psu and he wanted room for a sata ssd. I agreed that is a lot to spend on a psu so I edited it to fit a sata ssd and flex psu that not only costs ⅓ the price of the other one but is also technicaly smaller that is why I could fit a sata ssd. The only problem is it should only fit a 7mm thick ssd so do with that as you will. Also don't bother trying to put the io shield in it won't fit I'm not a good enough 3d modeler for that.

Materials:
Gigabyte 4060 lp
16mm power button
mITX motherboard
about 30mm cooler like this one https://www.newegg.com/p/13C-004P-000Y1 (only for intel) or the ID-COOLING IS-30 30mm Height Mini-ITX Low Profile Cooler for am4 and am5 if you can find it for sale
short PCIE riser cable
500w flex psu like this one https://www.amazon.com/Apevia-ITX-PFC500W-Modular-90-264V-Computer/dp/B0CWN59YCZ
65w or less CPU
Most ram should fit but. just to be safe choose a ram like rip jaws or one without a heat spreader
M.2 SSD and or sata SSD or a hard drive 7mm thick or less
Also some screws 4 for the motherboard (just use motherboard screws you would get with a case or button m3 screw probably), 1 for the PSU and you need to drill the hole for the screw because the website didn't say where exactly where the I don't know the size. 2 screws for the GPU same screws as the Motherboard. and 3 m2 or m3 screws for the side panel and 4 m3 screws for the sata ssd/hhd if you want that. Also check out my other one if you want a slightly smaller one and is more expensive.

Pls understand that this is an experimental PC case and I'm open to any suggestions you guys have I'm also open to remixes.