2x3x5 Cuboid (Full Functional) – Rubik 3D Printer Model
The file '2x3x5 Cuboid (Full Functional) – Rubik 3D Printer Model' is (stl) file type, size is 13.5MB.
The file '2x3x5 Cuboid (Full Functional) – Rubik 3D Printer Model' is (stl) file type, size is 13.5MB.
A 2x3x5 twisty puzzle full functional.
To make, print each part by the number indicated on the filename.
You only need 1 M3 screw of 14-20mm and 1 spring. You can use the screw and spring of an ordinary Rubik's cube.
All the pieces are oriented in the position with which I print them. The hardest piece to print is Edge2.
I use support in all pieces, except:
Corners (all of them), Edge1, Center2 and Cap
I recommend sanding the edges of the parts closest to the base of the printer, to improve the horizontal turn of the puzzle. Finally a bit of lub will make a better turn.
| 1x_-_Cap.stl | 1.1MB | |
| 1x_-_Center1.stl | 2.2MB | |
| 1x_-_Center2.stl | 2.6MB | |
| 1x_-_Core1.stl | 4.3MB | |
| 1x_-_Core2.stl | 4.3MB | |
| 4x_-_Corner1_L.stl | 3.3MB | |
| 4x_-_Corner1_R.stl | 3.3MB | |
| 4x_-_Corner2_L.stl | 2.6MB | |
| 4x_-_Corner2_R.stl | 2.6MB | |
| 4x_-_Edge1.stl | 4.4MB | |
| 4x_-_Edge2.stl | 6.9MB | |
| 4x_-_Edge3.stl | 3.6MB |
