2S1 122mm self propelled gun
At 1/300th the model should be 24.2mm long (multiply by three for 1/100th)
This is VJM's model with some of the detail raised and some strengthening to ensure it prints at 1/300th
Pics above are of a 1/300th model
| 2S1_122mm.stl | 31.8MB | |
| 2S1_122mm_hull__turret_separate.stl | 31.8MB | |
| 2S1_hull.stl | 28.4MB | |
| 2S1_Turret.stl | 3.4MB |
