28mm Rocket Artillery 3D Printer Model
The file '28mm Rocket Artillery 3D Printer Model' is (stl) file type, size is 49.8MB.
The file '28mm Rocket Artillery 3D Printer Model' is (stl) file type, size is 49.8MB.
28mm Rocket Artillery for table-top gaming models.
Please note that you will see there are 2 versions of the lifting mechanism. One is just straight forward, the other has gears and all kinds of finnicky bits. I test printed them and although the size is ok, I think that the tolerances are either too tight or my resin too sticky :D Either way, did not work so perfectly. All 4 versions of the launcher decks are included.
NOW Note, like I mentioned before, I am terribly new at this, so my files and objects are not merged properly, and the software I am using messes it up when I try to do it. So its... messy as far as STL go, but they print fine :) I am getting better though :D
| 28mm_Rocker_Arti_Assembly.stl | 60.6MB | |
| 28mm_Rocker_Arti_Base.stl | 899.7KB | |
| 28mm_Rocker_Arti_Base_Whole.stl | 2.7MB | |
| 28mm_Rocker_Arti_Cylinder.stl | 1.6MB | |
| 28mm_Rocker_Arti_Cylinder_Pin.stl | 46.6KB | |
| 28mm_Rocker_Arti_Deck_Rest.stl | 1.1MB | |
| 28mm_Rocker_Arti_Drive_Gear.stl | 154.9KB | |
| 28mm_Rocker_Arti_Drive_Gear_Pin.stl | 2.1MB | |
| 28mm_Rocker_Arti_Gearbox_Left.stl | 1.6MB | |
| 28mm_Rocker_Arti_Gearbox_Right.stl | 1.7MB | |
| 28mm_Rocker_Arti_Piston.stl | 338.9KB | |
| 28mm_Rocker_Arti_Piston_pin.stl | 46.6KB | |
| 28mm_Rocker_Arti_Sensor_Aray.stl | 1.4MB | |
| 28mm_Rocker_Arti_Transmission_Gear.stl | 137.7KB | |
| 28mm_Rocker_Arti_Warheads.stl | 386.7KB | |
| 28mm_Rocket_Artillery.stl | 22.0MB | |
| 28mm_Rocket_Artillery_Box_4_Horizontal.stl | 7.2MB | |
| 28mm_Rocket_Artillery_Box_4_Stacked.stl | 6.7MB | |
| 28mm_Rocket_Artillery_Box_8.stl | 10.7MB | |
| 28mm_Rocket_Artillery_Box_Door.stl | 313.3KB | |
| 28mm_Rocket_Artillery_Box_Rocket.stl | 3.6MB | |
| 28mm_Rocket_Artillery_Box_Rocket_Warhead.stl | 1.0MB |
