28mm Owl 3D Printer Model
The file '28mm Owl 3D Printer Model' is (stl) file type, size is 19.3MB.
The file '28mm Owl 3D Printer Model' is (stl) file type, size is 19.3MB.
I quickly tinkered an Owl familiar for someone in our Pathfinder group. I printed it with a 0.4mm nozzle and that's where it's claws get a bit messy, but when printed in 0.2mm nozzle it should be fine. I meshmixed this together out of 3 other models others else created, so I don't want to take any credit for each designs. I also did some minor tweaks of the pose in Blender so it looks more like flying / attacking.
I included a couple versions, depending on how you want to print it. I personally printed it in 3 different parts. Normally I would paint the model first before gluing it on the transparent wind standee, but I'm lazy and this isn't going to be my familiar anyway :D Maybe if he wants to paint it I can just print again and will include that picture here if that ever is going to happen.
If you going to print the owl as standalone I can suggest you to print it upside down, to minimize supports needed!
Anyhow, feedback is always welcome which helps me to improve myself.
Thx and enjoy!
Sismanski
| Flat-base-25x25-v1.stl | 684.0B | |
| Flat-base-R-25-v1.stl | 18.6KB | |
| owl_in_air_combined_v2.stl | 9.9MB | |
| owl_in_air_combined_with_base_v2.stl | 11.6MB | |
| owl_standalone_v2.stl | 8.1MB | |
| wind_standee.stl | 7.1MB |
