NORM!
All models are designed to print flat and without supports or rafts. All files have been run though NetFabb. I printed these in PLA at a resolution of .1mm.
I found a good deal of inspiration from Talismancer's bar: http://www.thingiverse.com/thing:1194408
Each individual section of the bar has 3 files. A Bottom, a Top, and a Front. The parts with a 1, 2 or 3 indicate a straight section of either 1", 2", or 3" in length. Parts with a 22.5 or 45 indicate the angled sections, 22.5 degrees or 45 degrees. Part with a R, L, or C indicate either Right side, Left side, or Center sections. A part with 'RL' means it can be used for either the right side or left side.
Enjoy!
| Bar_1_Bottom.stl | 946.1KB | |
| Bar_1_Front.stl | 1.7MB | |
| Bar_1_Top.stl | 989.4KB | |
| Bar_22.5_Bottom_C.stl | 220.0KB | |
| Bar_22.5_Bottom_RL.stl | 570.5KB | |
| Bar_22.5_Front_C.stl | 1.1MB | |
| Bar_22.5_Front_RL.stl | 1.5MB | |
| Bar_22.5_Top_C.stl | 700.8KB | |
| Bar_22.5_Top_L.stl | 830.9KB | |
| Bar_22.5_Top_R.stl | 893.4KB | |
| Bar_2_Bottom.stl | 1.2MB | |
| Bar_2_Front.stl | 2.5MB | |
| Bar_2_Top.stl | 2.2MB | |
| Bar_3_Bottom.stl | 1.7MB | |
| Bar_3_Front.stl | 2.6MB | |
| Bar_3_Top.stl | 3.0MB | |
| Bar_45_Bottom_RL.stl | 523.7KB | |
| Bar_45_Front_RL.stl | 1.5MB | |
| Bar_45_Top_L.stl | 691.7KB | |
| Bar_45_Top_R.stl | 771.6KB |
![Warhammer Manufactorum Bitz [reactor] 3D Printer Model](https://res.3axis.co/a26770c0-febb-4fb3-8f49-802da375cd4e/images/eccfc32b-9ce6-4ab7-b0bb-7952f5a7d595_thumb.jpg)