Here are two scatter terrain Marshes for your tabletop RPG games. There are 4 versions of each (normal, normal with holes to add grass, printed water, and printed water with holes for grass).
For these marches I used super glue to glue in a couple bristles from an old chip brush (cheap paint brush) into the printed holes. I used clear two-part epoxy resin to create the water pools.
These models print flat and do not require supports or rafts.
Enjoy!
| Marsh.stl | 21.2MB | |
| Marsh_printed_water.stl | 17.4MB | |
| Marsh_printed_water_with_Holes.stl | 17.5MB | |
| Marsh_Small.stl | 9.7MB | |
| Marsh_Small_printed_water.stl | 9.6MB | |
| Marsh_Small_printed_water_and_Holes.stl | 11.2MB | |
| Marsh_Small_with_Holes.stl | 10.2MB | |
| Marsh_with_Holes.stl | 21.2MB |
