This is a remix of 28mm scale normandy house by deveycat (https://www.thingiverse.com/thing:3239789) and ruins for it by eszyman (https://www.thingiverse.com/thing:3709269).
Those are beautiful models but upon printing them I realised that first of all they are hard to print because of a bottom overhang and second of all they don't aways align properly.
All models should fit precisely now and also should be easy to print, the bottoms are flat but contain key holes to stay together on the table.
I printed all those parts at .15mm layer height and only supported doors/windows, not the corners. Sorry for not uploading a photo but I already sent them to the buyer, when he finishes them I'll try to get a picture that demonstrates the final result.
If you want to further modify this I include a SketchUp file wth all the parts separated into groups with all geometry errors fixed.
| first_floor.stl | 12.1MB | |
| first_floor_roof.stl | 19.8MB | |
| first_floor_ruins.stl | 6.4MB | |
| ground_floor.stl | 10.3MB | |
| ground_floor_roof.stl | 20.6MB | |
| ground_floor_ruins.stl | 4.2MB | |
| house.skp | 40.7MB | |
| key.stl | 2.7KB |
