#27 – Mechanical Movements 3D Printer Model
The file '#27 – Mechanical Movements 3D Printer Model' is (STL) file type, size is 837.9KB.
The file '#27 – Mechanical Movements 3D Printer Model' is (STL) file type, size is 837.9KB.
https://youtube.com/shorts/wlIdU5LOgd0?feature=share
This is a 3D-printable model of Mechanism 27 from 507 Mechanical Movements. The mechanism features multiple gearing where a smaller triangular wheel drives a larger one using friction rollers in radial grooves.
Printing Instructions:
Orient all parts as shown in the picture for optimal printing results. There are some areas that may need support, like the grooves for the C-clips or the shaft hole on the main wheel, depending on your printer’s ability to print them without support. All parts need to be printed only once, except for the C-clips, which should be printed five times, and the rollers, which should be printed three times.
| bottom_frame.STL | 321.8KB | |
| crank.STL | 65.5KB | |
| crank_handle.STL | 131.5KB | |
| C_clip.STL | 47.3KB | |
| main_wheel.STL | 529.1KB | |
| roller.STL | 566.1KB | |
| roller_base.STL | 819.5KB | |
| shaft.STL | 94.0KB | |
| upper_frame.STL | 160.2KB |
