25mm Max Unit Cohesion Movement Tray 3D Printer Model
The file '25mm Max Unit Cohesion Movement Tray 3D Printer Model' is (stl) file type, size is 357.0KB.
The file '25mm Max Unit Cohesion Movement Tray 3D Printer Model' is (stl) file type, size is 357.0KB.
This is a flexible movement tray designed to make sure you have max separation very quickly. With a distance of 1.95"s from base edge to base edge. This movement tray will make sure you are able to maximize your spacing for deep strike denial.
The rings will snap on from the top and bottom. Make sure to set the ring in the groove then work the edge in slowly to snap into position.
I received a request to add a .95" spacer for AoS Max Cohesion as well, so the file has been updated to include that spacer.
| 0.95_Inch_Spacer_25mm.stl | 141.7KB | |
| 25mm_Base_Holder_Slotted.stl | 982.7KB | |
| 2inch_Spacer.stl | 272.0KB |
