25mm Base Movement Tray .5″ Cohesion 3D Printer Model
The file '25mm Base Movement Tray .5″ Cohesion 3D Printer Model' is (stl) file type, size is 353.5KB.
The file '25mm Base Movement Tray .5″ Cohesion 3D Printer Model' is (stl) file type, size is 353.5KB.
This is a combination of my first 25mm movement tray and my max unit cohesion. In practice the closeness can be an issue with models that like to stretch out.
I will be uploading a case to help with packing the models, but probably not until the weekend.
I have made a case with magnet slots that you will have to seal shut with either glue, epoxy, 3d pen, or whatever you have that can lock them in place. Just make sure to triple check polarity prior to sealing i used tape for the dry run just to be safe.
The magnets I used are 15 x 6.5 x 3 mm that I purchased from amazon.
https://www.amazon.com/gp/product/B077BWCC8D/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
There are two versions of the case one with hole (air) and one without (solid) printing time is only slightly shorter with the Air Version, but it does take a few grams less plastic.
| 25mm_Case_-_Back_Air_-_Magnets.stl | 223.3KB | |
| 25mm_Case_-_Back_Solid_-_Magnets.stl | 126.5KB | |
| 25mm_Case_-_Front_Air_-_Magnets.stl | 380.6KB | |
| 25mm_Case_-_Front_Solid_-_Magnets.stl | 99.2KB | |
| 25mm_Movement_Tray_.5inch_v3.stl | 270.7KB |
