25mm Aluminum Extrusion Delta Printer Brackets 3D Printer Model
The file '25mm Aluminum Extrusion Delta Printer Brackets 3D Printer Model' is (stl) file type, size is 1.9MB.
The file '25mm Aluminum Extrusion Delta Printer Brackets 3D Printer Model' is (stl) file type, size is 1.9MB.
These are the corner brackets for connecting together 80-20 25mm aluminum extrusions for building a delta 3D Printer. The bottom mounts also has all the holes for a NEMA 17 Stepper motor and the space for a G2 belt adaptor. For the top bracket there is a spot to mount two flanged m3 bearings to use as an idler pulley for a 6mm belt. You will need a 40mm m3 machine screw to mount the bearings. The bearings are linked below. There is also a spot to connect an endstop switch, they are also linked below. These are the parts that i used to construct the frame of my Delta Printer, which you can find through the link below:)
http://www.thingiverse.com/thing:1266969
Endstop Switch: http://www.amazon.com/gp/product/B00E0JOP76?keywords=micro%20switch&qid=1444430083&ref_=sr_1_1&sr=8-1
Here is a short teaser video of the Delta 3D Printer- https://www.youtube.com/watch?v=EX2o5emcHi4
Feel free to send me a message if you have any questions.
UPDATE 1-23-17 ---------------------------------
Hello everyone, Over the past many months and thousands of hours of design time I am nearly ready to release the final version of my consumer version of the Dimension 3 MultiMachine Delta 3D Printer. Check it out at http://www.Dimension3fab.com
| Bottom_Mount.stl | 4.6MB | |
| Corner_Mount_W_Motor.stl | 8.1MB | |
| Top_Bracket.stl | 6.2MB |
