250 ML Laboratory Flask Holder 3D Printer Model
The file '250 ML Laboratory Flask Holder 3D Printer Model' is (stl) file type, size is 7.7KB.
The file '250 ML Laboratory Flask Holder 3D Printer Model' is (stl) file type, size is 7.7KB.
This flask holder is meant to hold 250 mL flasks in place on an orbital shaker, assuming your shaker has screw holes to attach flask holders.
I remixed this 250ml Conical Flask Holder, making the following changes to the original design:
The two pieces should be printed laying down for the best strength and easiest print. I recommend printing with 1.2 mm walls (3 walls with 0.4 mm nozzle) and at least 20% infill for strength.
The pieces can be fit together when screwing them onto a shaker, or you are removing them occasionally, you can glue the pieces together with a drop or two of super glue.
Source: 250ml Conical Flask Holder
Tinkercad: 250 mL Flask Holder
| 250_mL_Flask_Holder_Bottom.stl | 18.2KB | |
| 250_mL_Flask_Holder_Top.stl | 18.2KB |
![Beer Yeast Separation Funnel Using Erlenmeyer [Customizable] 3D Printer Model](https://cdn.3axis.co/assets/26/28/ba/bf/2628babf-5264-48d4-a6a6-bf2f7a68f55c/images/534046e7-64a7-4d78-bc31-d2a1fd092da0_thumb.jpg)
