.22LR Grippy Lament Configuration Mag 3D Printer Model
The file '.22LR Grippy Lament Configuration Mag 3D Printer Model' is (STEP,STL) file type, size is 38.3MB.
The file '.22LR Grippy Lament Configuration Mag 3D Printer Model' is (STEP,STL) file type, size is 38.3MB.
This is designed around GonzoStrange's PMAG style magazine design for a Ceiner .22LR conversion. It's modified to be assembled without screws, allow for easy internal sanding and provide for toolless feed lip change outs. The test was printed with both long parts standing up, 40mm/sec .2mm height with tree supports and a brim. Use whatever settings work best for you and are strong enough. Obviously more than 4 walls and >25% cubic infill in PLA+. The test print slid together with very minimal sanding (you want it to barely fit together, no wiggles). It needs a @9.48mm dia, .45mm wire dia, free length @279mm spring.
| Base_Plate_Retainer_Pin.STEP | 1.5MB | |
| Base_Plate_Retainer_Pin.STL | 5.8MB | |
| Grippy_Lament_Assy.STEP | 21.5MB | |
| Grippy_Lips_L.STL | 2.3MB | |
| Grippy_Main_Body_L.STL | 22.8MB | |
| Grippy_Side_Plate_L.STL | 2.4MB | |
| Grppy_Bot_Plate_L.STL | 2.0MB | |
| V1B_Follower.STEP | 3.8MB | |
| V1B_Follower.STL | 8.3MB | |
| V1_Follower.STEP | 3.0MB | |
| V1_Follower.STL | 6.5MB | |
| V2_Follower.STEP | 2.4MB | |
| V2_Follower.STL | 4.6MB | |
| V3_Follower.STEP | 2.4MB | |
| V3_Follower.STL | 5.5MB | |
| V4_Follower.STEP | 2.4MB | |
| V4_Follower.STL | 5.4MB |
