Plz read instruction before printing!
If "download all files" isn't working download them one by one instead under "thing files".
A really nice bird feeder that looks like a real house that I designed in solid works. A little bit different compared to all the other ones out there.
This model consist of four parts. The bottom, the mid section with all the windows, the roof, and the chimney where you can fill the seeds. (i've used a cut off pet bottle to fill the seeds)
No support needed! This is a large a model so scaling would be necessary depending on your print volyme. You need to use brim on the mid section and also the roof. The roof section is designed to be printed with NO support. You just snatch off the two bits on the side when it's done. The chimney should be printed upside down.
The parts are designed to fit eachother together with a tight fit. Use some superglue to glue them together.
The bottom part has a 1" (25mm) hole in it so just put it on a broom stick. I can come up with some more parts for it if you like it :)
| bird_body_thingiverse.STL | 337.0KB | |
| bird_bottom_thingiverse.STL | 1.4MB | |
| bird_chimney_thingiverse.STL | 72.5KB | |
| bird_roof_thingiverse.STL | 13.8MB |
![[Remix] CR-10 Fan Mod 3D Printer Model](https://cdn.3axis.co/assets/01/3c/80/39/013c8039-4123-4419-8d92-a6c862619f7d/images/b659cf07-c59d-42a4-8477-f6128dc40c99_thumb.jpg)
