20mm Remix: Two Story Bldg-1 Updated 10/10/24 3D Printer Model
The file '20mm Remix: Two Story Bldg-1 Updated 10/10/24 3D Printer Model' is (stl) file type, size is 6.3MB.
The file '20mm Remix: Two Story Bldg-1 Updated 10/10/24 3D Printer Model' is (stl) file type, size is 6.3MB.
Can be printed on the base plate; used supports for windows and roof sections.
Printing the second floor on the base plate produces a slight lip that can be easily sanded off.
The second story floor needs to be cut from MDF board or sheet plastic.
The roof is not perfect, but it fits my base plate.
10/10/24 - Added corner pieces
| 1st_Story_Front-Back_1A.stl | 472.1KB | |
| 1st_Story_Front-Back_1B.stl | 473.2KB | |
| 1st_Story_Front-Back_1C.stl | 476.3KB | |
| 1st_Story_Side_1A.stl | 341.2KB | |
| 1st_Story_Side_1B.stl | 336.1KB | |
| 1st_Story_Side_1C.stl | 333.0KB | |
| 1st_Story_Side_1D.stl | 359.8KB | |
| 2nd_Story_Front-Back_1A.stl | 445.7KB | |
| 2nd_Story_Front-Back_2A.stl | 436.3KB | |
| 2nd_Story_Front-Back_3A.stl | 445.4KB | |
| 2nd_Story_Roof_A.stl | 6.6MB | |
| 2nd_Story_Roof_B.stl | 7.4MB | |
| 2nd_Story_Side_1A.stl | 353.3KB | |
| 2nd_Story_Side_3A.stl | 325.1KB | |
| 2nd_Story_Side_4A.stl | 341.0KB |
