20mm MFT Hole Plugs (specifically For Holes With A 45 Degree Chamfered Top 3D Printer Model
The file '20mm MFT Hole Plugs (specifically For Holes With A 45 Degree Chamfered Top 3D Printer Model' is (step,stl) file type, size is 105.6KB.
The file '20mm MFT Hole Plugs (specifically For Holes With A 45 Degree Chamfered Top 3D Printer Model' is (step,stl) file type, size is 105.6KB.
MFT tables are great but often you need a 'solid' surface to work on so that small parts don't fall in the holes. This MFT plug sits flush in a standard 20mm MFT hole that has 45 degree chamfered top edge. My MFT top was made with the PARF system supplied by Axminster UK and the holes have been chamfered using their tool.
Removal of the plug is easy with a fingernail or small flat blade.
I have included the STEP file as well as the STL, so you can adapt it to 19mm or different chamfers. I suspect that if you just have a straight sided hole they would not stay level.
Print flat side down with no supports, 2 or 3 walls and sparse infill (5%). These are useful for using up short lengths of leftover filament - each uses about 0.3m of filament.
Please click 'like' if you download and intend to print it/them
| MFT_20mm_plug.step | 53.0KB | |
| MFT_20mm_plug.stl | 299.5KB |
