20mm M14x1.5 To M10x1.5 Thread Reducer 3D Printer Model
The file '20mm M14x1.5 To M10x1.5 Thread Reducer 3D Printer Model' is (stl) file type, size is 785.9KB.
The file '20mm M14x1.5 To M10x1.5 Thread Reducer 3D Printer Model' is (stl) file type, size is 785.9KB.
I needed an adapter with these threads for an M14 truck shifter knob to fit an M10 shaft.
Couldn't find the right thing to order 3 times online, so I decided to try out 3d-printing one.
Works fine so far, we'll see how long the PLA lasts.
Your mileage may vary on durability and accuracy of printing :) It printed perfectly on Prusa MK3.5 using 0.1 and 80% in-fill, sliced with Prusa Slicer
Update 05 Oct 24: After using the PLA one, I would recommend using teflon (plumber's) tape or thread locker (I use medium strength). I also printed a PETG version, and because it turned out a little more 'rough' than the PLA version it's a lot grippier. I was able to tighten the shift knob quite a lot with thread locker, using the PETG one and it is very firm and I didn't hear any cracking or other bad noises.
| M14x1.5toM10x1.5reducer.stl | 2.0MB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
