2020 Spool Holder With Filament Guide 3D Printer Model
The file '2020 Spool Holder With Filament Guide 3D Printer Model' is (STL,stl) file type, size is 10.7MB.
The file '2020 Spool Holder With Filament Guide 3D Printer Model' is (STL,stl) file type, size is 10.7MB.
My Z axis movement was to close the frame on the top of my i3 clone. So designed arms that would not interfere with the x carriage movement. I used parts from http://www.thingiverse.com/thing:920183 and http://www.thingiverse.com/thing:1306326 to complete the assembly. The onshape link is https://cad.onshape.com/documents/dfc9e917ca53cbb3461ac532/w/8e5b1d4496900ee4749ac852/e/c80ce77be2081ed3ba671e23 if you want to tinker.
The filament guide uses #8-32 sae screws and nuts, it's what i have on hand. However M4 screws will fit in the hole the nuts are slightly smaller.
I have increased the size of the opening in the filament guide. I felt the original was too restrictive.
| ArmShim.STL | 16.9KB | |
| Cone_608z_v2.STL | 263.0KB | |
| Filament_Guide_1_of_2.stl | 106.5KB | |
| Filament_Guide_2_of_2.stl | 1.9MB | |
| Left_side_arm.stl | 12.8MB | |
| Right_Side_Arm_1.stl | 12.7MB |
