2019-01-20 - Remix Version 2 now available at: https://www.thingiverse.com/thing:3370411
Remix Version 2 was redesigned to make a more friendly, ergonomic, and usable mount.
If you need a different phone cradle, other than the IPhone 6S Plus, send the size of the phone, with the case, and I will resize the cradle to match your phone.
2018-08-31 - Version 2 redesign STL files uploaded.
Remix of 2013-2018 Ram 1500 iPad Mini Dash Mount by Mattdenney07.
I added a rotating coupling and iPhone cradle. The cradle can be replaced with other cradles to support other phones or tablets. I've printed it a couple of times, with and without supports. All came out nice. Print at a high infill and small resolution to make it as solid as possible. The hot sun coming thru the windshield in the summer will make it very hot. I'm in Florida and haven't had any issues.
When mounting in your truck, the rubber mat in the bottom of the tray lifts up. Use both screws from the tray to install the mount. It literally took 3 minutes to install. More mods coming, send suggestions.
| v2_-_Base.stl | 1.9MB | |
| v2_-_Base_Arm.stl | 2.6MB | |
| v2_-_Base_Pins.stl | 563.5KB | |
| v2_-_Phone_Cradle.stl | 4.8MB | |
| v2_-_Phone_Cradle_mount.stl | 1.4MB | |
| v2_-_Phone_Mout_Spindle.stl | 4.0MB | |
| v2_-_slide_catch.stl | 7.6MB | |
| v2_-_slide_pin.stl | 2.7MB | |
| v2_-__Assemebled_Phone_Cradle.stl | 30.3MB | |
| v2_-__Exploded_Phone_Cradle.stl | 30.3MB |
