2005 TARDIS Doors 1:12 Scale 3D Printer Model
The file '2005 TARDIS Doors 1:12 Scale 3D Printer Model' is (stl) file type, size is 842.1KB.
The file '2005 TARDIS Doors 1:12 Scale 3D Printer Model' is (stl) file type, size is 842.1KB.
This is a functional set of TARDIS doors for 1:12 scale figures made for the 2005 9th & 10th doctors’ TARDIS. The idea of this model is to be used in a homemade TARDIS interior model providing working doors.
To attach the doors slide each door into the holes of the base piece then slot the top piece over the top. Make sure that the doors are facing the correct direction for this to work. There is an image however the holes in the base & top are off-centre so make sure the front of the doors faces the closer end (final image demonstrates this).
I have not been able to test this so cannot confirm that it works which is why this is a work in progress build however I believe that this should work.
The door frame will not be able to balance on its own. This has been designed to be fitted to walls and a base when making a custom TARDIS interior.
Get the matching console here: https://www.thingiverse.com/thing:6390742
As this design belongs to BBC Worldwide I can only give permission for personal non commercial use. This model also uses a TARDIS phone made by bo14in: https://www.thingiverse.com/thing:5038525
All measurements in millimetres (mm)
| 2005_TARDIS_right_door.stl | 151.3KB | |
| 2012_TARDIS_left_door.stl | 1.8MB | |
| 2017_TARDIS_door_top.stl | 80.1KB | |
| TARDIS_door_frame.stl | 77.9KB |
