20 To 30.5 Adapter For Piko BLX 3D Printer Model
The file '20 To 30.5 Adapter For Piko BLX 3D Printer Model' is (STL) file type, size is 171.1KB.
The file '20 To 30.5 Adapter For Piko BLX 3D Printer Model' is (STL) file type, size is 171.1KB.
Lightweight adapter to mount a Piko BLX flight controller that uses 20x20 spacing to a 30.5x30.5 spacing used by Naze/CC3D/SP3/etc
Uses four M3x6 screws and nuts.
6/14/2016 Added a version with tabs instead of screw holes. Use flexible filament and pull the tabs through the board holes.
12/10/2017 Added a 30.5x30.5 to 16x16 adapter
| 20_to_30.5_Piko_BLX_Adapter.STL | 106.5KB | |
| 30.5_to_16_Adapter.STL | 178.4KB | |
| Piko_BLX_to_30.5_adapter_Flexible_v3_.STL | 166.7KB | |
| Piko_BLX_to_30.5_adapter_Flexible_v4_.STL | 166.7KB | |
| Piko_BLX_to_30.5_adapter_Flexible_v5_.STL | 166.7KB | |
| Piko_BLX_to_30.5_adapter_Flexible_v6_.STL | 152.6KB |
