2 Plank Open Wagon For 16mm Scale Garden Railway 3D Printer Model
The file '2 Plank Open Wagon For 16mm Scale Garden Railway 3D Printer Model' is (stl) file type, size is 6.5 MB.
The file '2 Plank Open Wagon For 16mm Scale Garden Railway 3D Printer Model' is (stl) file type, size is 6.5 MB.
This is the second wagon in a series of wagons to print for your 16mm (32mm & 45mm gauge) garden railway, they will work nicely in LGB scale to.
With each new model i will release some extra options and these will fit on all wagons in this series.
The model is easy to print , the only extra stuff you need is two steel rod for axis (3mm) and optional ballbearings (MR63ZZ) or brass bushings (easy to make, just drill a 3mm hole in a 6mm brass rod) for the wheel axis.
If you want a single buffer wagon use the frame from my 5 plank wagon.
2018-03-14 If you print at 75% of orginal STL, you are getting a perfect sized wagon for my Diesel Loco
2020-08-06 new version of frame1.stl, use frame1_V2 instead because a small alignment error.
| bottom.stl |
| frame1.stl |
| frame1_v2.stl |
| frame2.stl |
| long_side.stl |
| short_side.stl |
| wheels.stl |
