2 Inch Filter Box And Drawer 3D Printer Model
The file '2 Inch Filter Box And Drawer 3D Printer Model' is (stl) file type, size is 7.1MB.
The file '2 Inch Filter Box And Drawer 3D Printer Model' is (stl) file type, size is 7.1MB.
This is a very simple filter replacement kit; a box and the drawer inside. The box can be SC, T2 or M48 filter threaded, or a combination of any two of the three.
Important: The material of the box parts and drawers must be PTG, otherwise the spring parts will not work properly!
Be careful when screwing in the box, it is very easy to mis-screw the plastic threads into their metal counterparts. They can be screwed together so that the shafts of the female and male threads coincide.
It is also important not to over tighten the M3 screws when assembling the box.
Ingredients: 4 pcs. M3 x 16 mm countersunk head screw
| 1d25in_filter_drawer.stl | 219.4KB | |
| 2in_filter__drawer.stl | 277.6KB | |
| chest_for_4_filters.stl | 322.0KB | |
| chest_for_6_filters.stl | 431.7KB | |
| filter_box_bottom_m48_nut.stl | 3.7MB | |
| filter_box_bottom_sc_nut.stl | 3.0MB | |
| filter_box_bottom_t2_nut.stl | 3.7MB | |
| filter_box_top_m48.stl | 3.1MB | |
| filter_box_top_sct.stl | 3.4MB | |
| filter_box_top_t2.stl | 3.1MB |
