2 Euro Coin Magazine Dispenser V1 3D Printer Model
The file '2 Euro Coin Magazine Dispenser V1 3D Printer Model' is (skp,stl) file type, size is 630.1KB.
The file '2 Euro Coin Magazine Dispenser V1 3D Printer Model' is (skp,stl) file type, size is 630.1KB.
UPDATE: Check V2 at https://www.thingiverse.com/thing:6323383
could not find any so i made my own
holds 20 coins / 40 euro
spring used: length 57/11mm, id 13mm, od 15mm
anything with od<=20mm, id=>13mm, length>55mm and conpressed length<=12mm should work fine. (less compression=less coins).
top stays on with friction alone, but i secured it with a thin bead of uber-glue. be careful not to glue the slider in place; insert two coins before gluing.
only the top should be printed with supports
| 2eurotube.skp | 1.7MB | |
| 2eurotube_slider.stl | 254.7KB | |
| 2eurotube_top.stl | 257.5KB | |
| 2eurotube_tube.stl | 261.7KB |
