2.8 ILI9341 Touch Display Enclosure 3D Printer Model
The file '2.8 ILI9341 Touch Display Enclosure 3D Printer Model' is (stl,f3d) file type, size is 748.2KB.
The file '2.8 ILI9341 Touch Display Enclosure 3D Printer Model' is (stl,f3d) file type, size is 748.2KB.
2.8" Touch Display Enclosure with Swivel Mount for ESP32 and Home Assistant
This 3D-printable enclosure is designed to house a 2.8" ILI9341 touchscreen display, making it an interactive control panel for your Home Assistant setup. Compatible with ESP32 boards the mount is intended for under-desk installation, featuring a swivel joint for adjustable viewing angles and a cable-concealing design for a clean look. Use the touchscreen to control various automations, like lighting, via customizable buttons.
When using an ESP32-2432S028 (all-integrated ILI9341 with ESP on one board) see my other thing: https://www.thingiverse.com/thing:6829981
For ESPHome configuration files and detailed setup instructions, visit the GitHub repo: ESPHome Touch Display Mount (https://github.com/akuehlewind/ESPHome-touch-display-mount)
| inner-body.stl | 108.7KB | |
| locking-body.stl | 37.8KB | |
| outer-body.stl | 80.6KB | |
| table-mount.stl | 108.3KB | |
| touch-display.f3d | 684.7KB |
