This was designed during my time playing in aftermarket automotive applications. You are free to print your own and remix as you like, not for commercial reproduction.
Recommend printing in PETG or ABS for best results in automotive applications.
You will secure your iDash into the pod mount using Qty2- 3mmx5mm Magnets
(These may be glued or carefully slid inside the recesses when you insert your iDash)
Please take some consideration for slight shrinkage +-2% during printing (most print software/slicers remind you about this)
If you have questions you can reach out here and I'll help as best I can. Enjoy!
| Vent-4.6.8-Final.stl | 1.5MB |
