2.5″ SATA SSD Housing 3D Printer Model
The file '2.5″ SATA SSD Housing 3D Printer Model' is (stl) file type, size is 19.3KB.
The file '2.5″ SATA SSD Housing 3D Printer Model' is (stl) file type, size is 19.3KB.
I still had a spare 2.5" SATA SSD lying around so I decided to make an enclosure for it.
I used this adapter from AliExpress.
Extra's needed to complete it:
2x Threaded insert M2 x 4mm2x Screws M2 x 5mmIt's a quite tight build, so depending on the used materials a little rescaling could be needed
| SSD_Behuizing.stl | 76.4KB | |
| SSD_Behuizing_deksel_noLogo.stl | 24.1KB |
