2.5″ Exhaust Bend Snap Fabrication Kit 3D Printer Model
The file '2.5″ Exhaust Bend Snap Fabrication Kit 3D Printer Model' is (STL,STEP) file type, size is 12.3MB.
The file '2.5″ Exhaust Bend Snap Fabrication Kit 3D Printer Model' is (STL,STEP) file type, size is 12.3MB.
Finally a simple way to mock up and layout custom exhaust designs.
I designed this system similar to my header fabrication kits.
Makes exhaust system planning and layout a breeze.
Complex compound bends and miter cuts are no longer hard to figure out and test fit.
10, 30, 45, 60, 90, 2"Long Straight, and a 4" Long straight pcs will allow you to come up with any complex bend you can think of.
They have angle reference locating notches around the outside in 45deg increments.
To make it easy for you to copy locating marks to your cut metal bends
These are designed to mimic the 2.5" stamped Stainless bends you can buy off of ebay or many other performance exhaust supply shops
These have a 7.5" outside diameter, 2.5" inside diameter, with a 2.5" Center line Radius
Ive also added a cutting cradle to help with cutting the donut on the bandsaw
""A 3.75CRL version of the 2.5" Daimeter tube has been added. It is in a 45deg version"""
| 2.5in_donut_jig_v1.STL | 8.1MB | |
| exhaust_donut_mandel_10_deg.STEP | 375.8KB | |
| exhaust_donut_mandel_10_deg.STL | 899.5KB | |
| exhaust_donut_mandel_bend_2.5_snap_straight_2in_long.STEP | 410.4KB | |
| exhaust_donut_mandel_bend_2.5_snap_straight_2in_long.STL | 865.4KB | |
| exhaust_donut_mandel_bend_2.5_snap_straight_4in_long.STEP | 410.3KB | |
| exhaust_donut_mandel_bend_2.5_snap_straight_4in_long.STL | 864.9KB | |
| exhaust_donut_mandel_bend_30_degree.STEP | 1.3MB | |
| exhaust_donut_mandel_bend_30_degree.STL | 1.8MB | |
| exhaust_donut_mandel_bend_45_degree.STEP | 1.2MB | |
| exhaust_donut_mandel_bend_45_degree.STL | 1.8MB | |
| exhaust_donut_mandel_bend_45_deg_3.STEP | 1.7MB | |
| exhaust_donut_mandel_bend_45_deg_3.STL | 9.6MB | |
| exhaust_donut_mandel_bend_60_degree.STEP | 1.3MB | |
| exhaust_donut_mandel_bend_60_degree.STL | 2.0MB | |
| exhaust_donut_mandel_bend_90_degree.STEP | 1.3MB | |
| exhaust_donut_mandel_bend_90_degree.STL | 2.3MB |
