2.00″ Exhaust Header Fabrication Kit – Plastic Snap Kit 3D Printer Model
The file '2.00″ Exhaust Header Fabrication Kit – Plastic Snap Kit 3D Printer Model' is (STEP,STL) file type, size is 29.6MB.
The file '2.00″ Exhaust Header Fabrication Kit – Plastic Snap Kit 3D Printer Model' is (STEP,STL) file type, size is 29.6MB.
Same design as my 1.625 header fabrication kit. Identical snap system. These 2.000 parts will snap onto the 1.625 parts.
Each bend block is equivalent to a 22.5deg pc.. So 4 pcs will give you a perfect 90deg bend.
Alignment notches are every 22.5deg as well.
Basic parts included:
1" long straight
1" long straight with dead-end
3"rad centerline
4"rad centerline
5"rad centerline
6"rad centerline
7" rad centerline
8" rad centerline
| 2.00_22.5deg_3in_center_line_rad.STEP | 2.3MB | |
| 2.00_22.5deg_3in_center_line_rad.STL | 3.5MB | |
| 2.00_22.5deg_4in_center_line_rad.STEP | 2.2MB | |
| 2.00_22.5deg_4in_center_line_rad.STL | 3.5MB | |
| 2.00_22.5deg_5in_center_line_rad.STEP | 2.3MB | |
| 2.00_22.5deg_5in_center_line_rad.STL | 5.3MB | |
| 2.00_22.5deg_6in_center_line_rad.STEP | 2.3MB | |
| 2.00_22.5deg_6in_center_line_rad.STL | 3.6MB | |
| 2.00_22.5deg_7in_center_line_rad.STEP | 2.2MB | |
| 2.00_22.5deg_7in_center_line_rad.STL | 17.1MB | |
| 2.00_22.5deg_8in_center_line_rad.STEP | 2.3MB | |
| 2.00_22.5deg_8in_center_line_rad.STL | 17.6MB | |
| 2.00_Straight_1in.STEP | 3.8MB | |
| 2.00_Straight_1in.STL | 4.5MB | |
| 2.00_Straight_1in_deadend.STEP | 3.7MB | |
| 2.00_Straight_1in_deadend.STL | 3.9MB |
