Don't know if a 4mm wall will be too thick or a 1mm section too thin? I made this little fold-out swatch because, while modeling, I had no real-world example of different thicknesses. I had rulers, but it's hard to get a feel for something by sight alone, so I created this.
Now I have a fairly small set of thicknesses I can grab from my desk catchall and answer questions like "Is 3mm going to be too chunky for this case?"
The print uses one M3 20mm screw and an M3 nut, the fit will be tight... I suggest running the screw through the 5 swatches and backing it out before putting everything together.
Update: I've added a longer version for those without space issues, the STLs marked with Long have an added 40mm in length.
Update Update: Added .IGES file for anyone wanting to remix.
| 1mm.stl |
| 1mm_Long.stl |
| 2mm.stl |
| 2mm_Long.stl |
| 3mm.stl |
| 3mm_Long.stl |
| 4mm.stl |
| 4mm_Long.stl |
| 5mm.stl |
| 5mm_Long.stl |
| Casing.stl |
| Casing_Long.stl |
| Thickness_Feeler_Swatch_v2.iges |
