1_72 Panzerlok BR 53 (semi Fictional) 3D Printer Model
The file '1_72 Panzerlok BR 53 (semi Fictional) 3D Printer Model' is (stl) file type, size is 1.6 MB.
The file '1_72 Panzerlok BR 53 (semi Fictional) 3D Printer Model' is (stl) file type, size is 1.6 MB.
Version 1.2. Model is the same, i did some more refurbishment on the description/instructions.
Military train series 3. Fictional German armored trains
Panzerlok BR 53 "Borsig"
A 1_72 scale model of a semi fictional German armored locomotive.
NOTE: due to wanting to promote the fact that you can always mix and match the bits of these military trains, the BP-45 is split into 3 parts:
Yes indeed, with all these tools at my disposal, why not implement some of my own designs into the mix as-well.
As with the BR 57 my plan is to make the unarmored version of this as-well.
The model is for display purposes only, so the wheels do not roll, but the "bogies" do swivel, so technically you could display this on some curved track as-well.
The wheels have been measured to work with Hobbyboss 1_72 scale track, and the one i designed for the Schwerer Gustav.
The skirts just snap in place so you can remove them and add them back on whenever you want.
| Armored_body.stl |
| Chassis_1.stl |
| Chassis_2.stl |
| Front_bogey_3_axle.stl |
| Guide_wheels.stl |
| Locomotive_body.stl |
| Rear_bogey_2_axle.stl |
| Skirt_1.stl |
| Skirt_2.stl |
| Under_bit.stl |
| Wheels_front_1.stl |
| Wheels_front_2.stl |
| Wheels_rear_1.stl |
| Wheels_rear_2.stl |
