199c Camera Canopy 3D Printer Model
The file '199c Camera Canopy 3D Printer Model' is (stl,f3d) file type, size is 1.7MB.
The file '199c Camera Canopy 3D Printer Model' is (stl,f3d) file type, size is 1.7MB.
This is just a lite and simple canopy for the 199c canopy inspired by Jakob_Duus' design.
Fixed some sections so the V2.1 could fit properly. It has a slightly lighter design but should mostly depend on your print settings. I also lowered the angle as I primarily fly in my room - this is set to 23 degrees.
The .f3d file is included which also has the camera mock-up and the canopy itself.
Update [18/01/2024]: the V2 variant got some minor changes that made it easier to remove the camera from the canopy, reduced a tiny bit of weight, and made removing supports easier.
Update [1/07/2024]: V3 removed one more little section. This reduced the weight a bit and makes it easier to remove the camera from the canopy. Added some top corner guards too for its pcb and the V3_Fin version has a tiny fin for added protection.
| 199c_Camera.stl | 185.9KB | |
| 199c_Camera_and_23_degree_lite_canopy.f3d | 1.2MB | |
| Canopy_23_degres.stl | 262.2KB | |
| Canopy_V2.stl | 286.4KB | |
| Canopy_V3.stl | 297.2KB | |
| Canopy_V3_Fin.stl | 297.2KB |
