1958 Ford Nucleon 3D Printer Model
The file '1958 Ford Nucleon 3D Printer Model' is (stl) file type, size is 13.8MB.
The file '1958 Ford Nucleon 3D Printer Model' is (stl) file type, size is 13.8MB.
DESCRIPTION
Here it is, the all mighty 1958 Ford Nucleon!, coming from an era where the fear of nuclear devastation and total atomic annihilation was equally balanced with the belief of powering the future with atomic energy, as a source of clean and limitless power!
This highly detailed model comes with a fully modelled interior based on the preliminary drawings from 1956. This pack also includes the Nuclear Charging Station as seen on https://fordimages.archivea.com/perl/options.pl?imageID=70759&ckon=thumb which engineers from the era believed were going to replace the gas stations. Thanks to the power of the atom, the nuclear reactor on the back could operate without recharging up to 8000 km!
The body has been recreated as exactly as possible with the images from the early mock-ups from 1958 (wings edition) . The underbody of the vehicle has been reimagined as it could be as there are no photographs on this.
If you are a fan of the Fallout Series, this car is a must have for you, as this vehicle is the main inspiration for all of the in-game cars (and for Fallout in general).
PRINT INSTRUCTIONS
-Designed to be a multi-color model, as all the parts are separated in order to be printed with the adequate color.
-Highly recommended to scale at least at 110%.
-Supports needed.
-Except the Nuclear Charging Station parts and the cabin glass, the majority will need a little glue so that they stick to the main chassis-body.
| antenna.stl | 208.2KB | |
| ball_charger.stl | 1.7MB | |
| cabin_glass2.stl | 609.5KB | |
| cabin_glass_1.stl | 291.0KB | |
| chair.stl | 314.9KB | |
| charger_base.stl | 4.9MB | |
| charger_stick_1.stl | 334.7KB | |
| charger_stick_2.stl | 223.9KB | |
| charger_stick_3.stl | 144.3KB | |
| core.stl | 8.5MB | |
| dashboard.stl | 2.1MB | |
| detail_cabin.stl | 297.5KB | |
| interior_vents.stl | 1.0MB | |
| main_body.stl | 40.7MB | |
| nucleon_name.stl | 10.1MB | |
| plate.stl | 651.0KB | |
| side_1.stl | 432.1KB | |
| side_2.stl | 533.7KB | |
| steering_axis.stl | 232.7KB | |
| steering_wheel.stl | 3.4MB | |
| underbody.stl | 12.4MB | |
| wheel.stl | 3.9MB | |
| wheel_axis.stl | 206.1KB | |
| yellow_part_underbody.stl | 23.5KB |
