19″ Rack Mount For Fujitsu Futro S920 3D Printer Model
The file '19″ Rack Mount For Fujitsu Futro S920 3D Printer Model' is (scad,stl) file type, size is 25.8KB.
The file '19″ Rack Mount For Fujitsu Futro S920 3D Printer Model' is (scad,stl) file type, size is 25.8KB.
This is a 19" rack mounting bracket for Fujitsu Futro S920 thin clients. The S920 is a rather cheap device designed to run 24/7 and can, with Linux OS, also be used for smaller server appliances that do not require a RAID system or large storage devices.
The mounting brackets can also be used for the predecessor of the S920, the S900. In that case, two 3mm key holes need to be drilled in the lower part of the S900 case that keep the unit in place and prevent it from sliding out of the bracket.
The S920 unfortunately is not aligned to 19" rack height units. Mounting an S920 (or an S900) in a 19" rack will take up slightly more than 1 height unit in the rack, but less than 1.5 height units. So a little gap is to be expected here.
| rackmount.scad | 3.7KB | |
| rackmount_left.stl | 61.5KB | |
| rackmount_right.stl | 61.5KB |
